Share
You could earn SmartPoints on this page!SmartPoint Coin

May 26, 2019 at 9:08 PMComments: 0 Faves: 0

What are the factors that cause the shutdown of the charcoal machine production line?

By charcoal machine More Blogs by This Author

When using thecharcoal machine production lineto produce charcoal, various problems may occur, such as a sudden shutdown of the equipment. In fact, as long as the operator's operation is correct, basically there will be no such problem, then the problem arises. The user must solve it in time, otherwise, it will delay the production schedule and the raw materials will be wasted. What are the factors that cause the shutdown of the charcoal machine production line?

1. The discharge port of thecharcoal machine production lineis blocked, causing the storage bin to be full, which indirectly leads to the unloading of the unloading bearing of the charcoal machine equipment, and the charcoal machine equipment has an accidental shutdown. In this regard, the solution is to remove the blockage of the charcoal machine discharge opening to ensure smooth discharge.

2. The V-belt of the motor of the charcoal machine production line is too loose, causing the belt to slip. In this regard, we have to tighten or replace the V-belt to solve such problems.

3. The fixing bolts of the forming sleeve of the charcoal machine production line are loose, causing the bearing housing of the whole machine to be stuck and unable to rotate.

The above three aspects are only the main reason for the shutdown of the charcoal machine production line. There may be some other reasons. I hope that the operators should not panic when they encounter these problems. They should stop the machine first, then carefully check the problem, solve the problem and solve the problem.

more about the charcoal machine production line

https://charcoalmachines.com/charcoal-machine-production-line/

More from charcoal machine Others Are Reading

0 Comments

Comment on the Smart Living Network


Site Feedback