Share
You could earn SmartPoints on this page!SmartPoint Coin

How to improve the quality of charcoal — an article on the Smart Living Network
April 24, 2019 at 10:54 PMComments: 0 Faves: 0

How to improve the quality of charcoal

By

In general, the raw materials for machine-made charcoal are rice husk, coconut shell, sawdust, peanut shell, corn cob, straw, cotton rod, vinasse, coffee shell, sorghum rod, etc. All wood containing lignin can be used with charcoal making machine equipment. Processed into machine-made charcoal.

Relatively speaking, the raw materials for the production of machine-made charcoal are not good or bad. Relatively speaking, the slow-growing tree species are hard and hard, and the hardwood is much better than the softwood charcoal. Pine, elm, fir, elm, bamboo, etc., the burning performance is good, there are fruit trees, and some hard shells are also good raw materials. Of course, the harder the sawdust, the higher the density of the particles, the lower the compression ratio to achieve the same finished product density, which saves a part of the energy and equipment losses, which is also very cost-effective.

In addition to considering the value of combustion, we must also consider other factors, such as ash. This problem is very important. The internal composition of the raw material determines its ash size. Therefore, some customers are smarter to burn some low combustion values. High-value raw materials are mixed together, which not only saves costs but also improves the quality of charcoal and reduces the loss of charcoalmaking machine parts. Wood containing lignin in the charcoalmaking machine production line is a raw material for processing machine-made charcoal, and does not require any additives in the production process.

More about charcoal making machine

https://charcoalmachines.com/charcoal-machine-production-line/

More from charcoal machine Others Are Reading

0 Comments

Comment on the Smart Living Network


Site Feedback