Share
You could earn SmartPoints on this page!SmartPoint Coin

January 2 at 2:53 AMComments: 0 Faves: 0

1235 aluminum foil VS 8011 aluminum foil

By zhangmenghao More Blogs by This Author

Tape aluminum foil has the advantages of good adhesion, strong adhesion, anti-aging, and good thermal insulation properties. The materials commonly used for tape aluminum foil are 8011 aluminum foiland 1235 aluminum foil. The two are different alloys. What is the difference?

rn

The composition of 1235 aluminum foil and 8011 aluminum foil alloy are different. The difference in process is the annealing temperature. The annealing temperature of 1235 aluminum foilis lower than that of 8011 aluminum foil, but the annealing time is basically the same. The difference between the finished aluminum foil tape 1235 aluminum foiland 8011 aluminum foil is that the strength is slightly different. The tensile strength of 8011 aluminum foil is higher than the tensile strength of 1235 aluminum foil. At the same time, the elongation of 8011 aluminum foilis not much different from that of 1235 aluminum foil. Higher.

rn

Aluminum foil tape is divided into soft state and hard state, namely H18 and O state. The hard aluminum foil tape production process does not need to be annealed, but sometimes requires baking oil, and the soft aluminum foil tape needs to be annealed to make its properties soft. There are many aluminum foil tapes using 1235 / O alloy on the market.

rn

1. Mingtai Aluminum has more than 20 years of production experience. The manufacturer is strong, with modern production lines and modern inspection production lines. The factory covers an area of more than 1.3 million square meters. The foil mill used has high production capacity and full specifications to meet customer ordering requirements. Thickness up to 0.6 mm, outlet thickness up to 0.02 mm, width up to 1800 mm

rn

2. Mingtai Aluminum factory direct sales, reduce intermediate complex links, reduce customer costs, mature production technology of Mingtai Aluminum, reduce production costs as much as possible, so that products are of good quality and low price.

rn

Mingtai Aluminum takes orders for 3-2000 tons of raw materials for tape and aluminum foil, and sells them worldwide

More from zhangmenghao Others Are Reading

0 Comments

Comment on the Smart Living Network

THRIVE Email Newsletter from HelloLife®

Subscribe to the THRIVE Newsletter


Site Feedback